1. Clone-A-Willy and Balls Vibrator Molding Kit

      Average customer review 3 out of 5 stars10 reviews

      Like Tom and Jerry or bunting and weddings, willies and balls are a divine pairing designed never to be apart. Reunite your 3 musketeers in vibrating silicone form with Clone-A-Willy's premium kit, which has an added ball bowl for tip-to-stem replication.


      Customers also buy:

      Add to Wishlist

      In Stock

      Domestic Shipping Information

      • Priority 3-5 day shipping - Free when you spend $59.99+
      • Expedited 2-3 day shipping - Free when you spend $200+
      • Express 1 day shipping - $29.99
      • Place your order by 5pm EST
        (excl. weekends & public holidays)
        for same day dispatch

      Collect 800 Points

      Order over the phone: Call 1-866-647-9194 and quote code 61138.

      1. Clone-A-Willy and Balls Vibrator Molding Kit

      Mouse over image to zoom

    1. Product Description

      Like Tom and Jerry or bunting and weddings, willies and balls are a divine pairing designed never to be apart. Reunite your 3 musketeers in vibrating silicone form with Clone-A-Willy's premium kit, which has an added ball bowl for tip-to-stem replication.

      Do your member justice by casting its full length and 2 veg, for prouder sizing and better stimulation in use. With everything you need to create a completely body-safe platinum-cure silicone realistic vibrator, this is a giggle-a-minute project and a unique shared experience.

      In addition to its added ball mold this kit also features a multispeed vibrator to increase the range of sensations, operated by a wired rather than in-built controller for complete versatility during use.

      Perfect as a sexy Christmas or Valentine's gift.

      The penis molding kit contains:

      - Molding tube with testicle attachment

      - Algae-based molding powder

      - Platinum-cure silicone

      - Multispeed vibrating unit

      - Full illustrated instructions

      - Stir stick

      - Thermometer

      Key Features:

      • Realistic vibrating molding kit to create a direct silicone cast of your favorite penis and balls
      • Creates a vibrating silicone dildo with the exact size, shape and details of your chosen erection
      • Added stimulation from the powerful multispeed vibrator
      • Perfect as a naughty gift or for long-distance relationships
      • Includes 2 powder bags to amply cover cock and balls
    1. Power and speed

      • Battery Info: 2 X AA battery
      • Controller Type: Wired - scroll wheel
      • Power Type: Batteries (not included)
      • Vibration speed: Multiple speeds
    2. How it feels

      • Contains latex: No
      • Contains phthalates: No
      • Flexibility: Firm
      • Material: Silicone
      • Waterproof: No
    3. Essential info

      • Harness Compatible: Yes
      • Has balls: Yes

    Product Videos

    1. Clone-A-Willy & Balls Vibrator Molding Kit

      Like Tom and Jerry or Bill and Ted, cock and balls are a divine pairing designed never to be apart. Unite your musketeers in vibrating silicone form with Clone-A-Willy's premium kit, which has an added ball bowl for tip-to-stem replication.

    2. How To Use A Clone-A-Willy Kit

      Create a unique erotic gift for your partner with the Clone-A-Willy Kit. Inside you'll find everything you need to make a cast of your penis and turn it into a vibrator. The non-toxic and body-safe formula are ideal for intimate play.

    Buyer's Guides

    Our expert Gifts and Games Guides help you find the perfect sexy gift for your lover.

    Beginner's Guide to Clone-A-Willy

    Top 10 Gifts and Games for Better Foreplay

    Best Sex Games for Couples

    1. Customer Reviews

      Clone-A-Willy and Balls Vibrator Molding Kit 10 3 out of 5 stars 3 out of 5

      5 star
      4 star
      3 star
      2 star
      1 star
      1. Clone-A-Willy and Balls Vibrator Molding Kit
      2. Clone-A-Willy and Balls Vibrator Molding Kit


    1. Clone-A-Willy

      Reviewed: August 9, 2019 by RedRocket, a Straight Married Male

      This was our second Clone-A-Willy purchase. Compared to the one without ball extension we found this one to be far superior because it is easier to clone your junk to actual size and it was actually less messy this time around!

      Though you shouldn’t expect not having to spend time cleaning yourself after the mould is done. Thus don’t expect to just be able to jump into sex straight after.

      Making the mould is simple enough but requires almost precision timing so you don’t screw up the moulding process by it solidifying too early. As a pro tip, make sure you have a partner helping you out as exercising your junk and mixing the mould at the same time doesn’t work too well.

      Use of cock/ball ring will help to keep you hard during the cloning process and didn’t leave funny looking mark on the finished product. Also, you should consider some alternative methods of stimulation as well, because at least for me showing my junk to a lukewarm goo wasn’t particularly exciting and you want to stay as hard as you can for the cloning process.

      I wish there were different vibrator add-ons or accessories that were available to it, though I guess you could use any other vibrating piece as a substitute to the one coming with the product.

      A big plus for them adding two sets of moulding materials with the kit in case you screw up the mould on the first try. On the one without the ball cup, there was only one set of the moulding mix provided.

      Now that you have your mould, you can just buy more silicone mixture to make yourself another one.

      As a last tip, if you don’t use the vibrator in your clone; the amount of silicone is not enough to clone a full-size copy of your junk.

    2. Overall Rating
      10 out of 10 stars
      Better than the one without ball cup.
      It's a messy process.
      Bottom line
      Perfect gift for couples.
    3. Was this review helpful to you? Yes
    1. Christmas Gift From Heaven

      Reviewed: January 27, 2018 by dellboy70, a Straight Married Male

      This is the best gift I got my OH this Christmas!

      So, upon her opening this gift she giggled and we both agree right away to warm up my organ, stick on a cock ring and get to our moulding adventures!

      So, after we read the instructions and put a really old towel down to catch any spillage, after assembling the tube we got the water to the correct temperature and quickly added the powder to it.

      We then poured it into the mould and my OH began kissing and touching me to keep me fully erect!

      My cock did not touch the sides of the tube surprisingly and I did not have any problems with this.

      We then poured the silicone mixture into the mould and let it sit for 24 hours to set.

      Then the next day we pulled the silicone mould out and give it a good wash and cleaned up any moulding marks carefully with a craft knife.

      Then after we were happy we gave it a try and the vibrations from the little device are amazing! The balls are a great addition.

      Thanks for reading and I highly recommend.

    2. Overall Rating
      10 out of 10 stars
      Bottom line
      Perfect gift.
    3. 4 people found this review helpful. Was this review helpful to you? Yes
    1. Yes it's fiddly but get it right and it's worth it

      Reviewed: December 22, 2017 by OriginalScreenName

      Let's face it... this is a tricky thing to do.

      You're going to make a realistic replica of your cock and balls. A replica that will vibrate and not only that, but you're going to do it whilst trying to maintain a rock hard erection and some semblance of dignity. Yes, it's going to be tricky!

      But I must confess, we've had previous:

      With a wife who is into crafts I took a punt a couple of years ago and surprised her with an early Christmas gift of a regular Clone-A-Willy. As I waited tentatively for her to open the box, the look of sheer excitement and amusement on her face meant that I knew the gamble had paid off. However, the first one was tricky and lots of the comments mention the things we discovered when doing the first one.

      Yes, the instructions can be tricky to follow if you've launched straight in.

      Yes, an erection is tricky to maintain if you've not planned ahead.

      Yes, you might find yourself running for more tape or a jug if you've gone in all guns blazing... (you can see where I'm going here.)

      However, there's something quite special about either being able to go on a work trip and knowing the wife has a replica, or even using it together.

      So recently I thought it might be nice to surprise the wife with the cock, balls and vibrator version and again, the laugh and the look when she opened the gift was worth it. But this time we were better prepared.

      This time we did the following things based on the experience from last time and it all definitely helped.

      Read the instructions thoroughly.

      Used Gaffa tape and used lots of it to make it sturdy.

      Got everything needed in advance.

      Did it in the bathroom, when it gets messy it peels off a shiny surface. (Kitchen would also work - basically it helps being near water and not over carpet.)

      Used our own thermometer.

      The missus was dressed incredibly inappropriately for some very helpful incentive.

      Trusted the missus to do the crafty stuff whilst I just concentrated on being hard - without the incentive it is NOT a sexy thing to do (unless you have a blancmange fetish).

      Whilst inside the mould the missus gave me a show

      When it comes to getting out of the mould being fully shaved definitely helped this time.

      When doing the first clone my cock touched the side of the mould which wasn't great. This time as it was setting I could see I was touching the side again, so a little push down on the outside of the plastic to push my cock back in and the gunk moves back around the cock. Time it right as it's setting and the little push worked a treat. Too early and there's not enough resistance in the gunk to adjust, too late and there's too much resistance.

      I didn't bother with a cock ring at the base, under your balls but it would definitely help. As would a certain blue pill...

      Trust me when I say this is not a sexy process. It's messy model making and you're trying to do it and stay as hard as possible. There is no point spending a fair old chunk of cash and not doing it properly. Otherwise it's just a waste.

      Comparing the two processes, the regular Clone-A-Willy ended up seeming short and stubby as it's difficult to do the full length but including the balls makes it easier to get the full length. Not only that but it seems to make the whole process less messy, so worth the extra this time but that is based on us doing it before.

      To sum up, do it with a partner, have a laugh, make it fun and make it sexy. We had a good giggle the second time around and we had much better results. Get it right and it's well worth it.

    2. Overall Rating
      8 out of 10 stars
      Full length is definitely better
      There's no way to avoid it - but you're sticking your knob in blancmange
      Bottom line
      Be into crafts, make it fun and stay hard and it is well worth doing
    3. 10 people found this review helpful. Was this review helpful to you? Yes
    1. Very accurate replica, great fun for a long distance relationship

      Reviewed: January 18, 2016 by billbill, a Straight Married Male

      I bought this as a fun present for my SO. We're in a long distance relationship and I thought it might be fun for her to have a little bit of me with her, particularly when we video chat. It was certainly fun (and messy) making the clone together.

      The first instruction on the kit is to read all the steps, making sure you understand the timings and have all the pieces ready to make a great clone. It was quite fun both preparing the mould while trying to get my little fella super hard. After the rush of "hoisting the main sail" and quickly inserting it into the molding powder, the rest of the process is quite sedate.

      We had a slight problem keeping the vibrator in the in the silicone as it was drying, it kept floating to the surface.

      In the end, the clone of my willy came out looking very like the real thing, but with added vibrations!

    2. Overall Rating
      8 out of 10 stars
      Very realistic clone.
      The vibrator floated out of the silicone.
      Bottom line
      Good fun, and a great idea for a DIY sex toy.
    3. 3 people found this review helpful. Was this review helpful to you? Yes
    1. Great fun

      Reviewed: November 13, 2015 by NEvans, a Straight Engaged Female

      Having had an original Clone-A-Willy in the past, I was very excited when I received the one with balls as a tester. When I had the original Clone-A-Willy I had always wondered what it would be like if it had the addition of balls and thought that it was something the Clone-A-Willy range lacked.

      As always Lovehoney lived up to their very fast and discreet delivery. The Clone-A-Willy is presented in a simple white cardboard box, with the name of the product printed in gold on the front. The box is very simple, I prefer this to packaging that has lots going on, or has cringy nude pictures covering the whole packaging. The packaging has brief steps on the back that gives you a rough idea of what creating the replica penis will involve.

      The kit has almost everything that you will need in order to create the Clone-A-Willy. I would advise to have some duct tape and a disposable container. Something that would make yours or your partner’s penis stay erect for a longer period of time, such as a cock ring, or male enhancing supplements, would also be very handy.

      The instructions are clear and are easy to follow, but I find that the outcome is not as great as it should be despite following the instructions perfectly. I also found that the instructions provided some false information to create a perfect replica.

      In order to have the addition of the balls on the Clone-A-Willy you need to tape a cup to the end of the tube that is designed to mould the penis. The instructions do not specify what type of tape you should use. We used brown parcel tape the first time around. When my partner inserted his penis to the mould, masses of the moulding substance came out. As our bathroom floor is tiled it was very easy to peel the moulding substance off once dried. The moulding substance also came through the tape a little. This made a gap in the mould where the silicone could leak, so we decided to try again.

      Luckily the kit has two bags of moulding powder provided, unlike the original Clone-A-Willy. If you get the mould perfect the first time around you could always save it and buy more of the silicone to create another Clone-A-Willy. I thought that this was a great idea as it meant we could try and mould my partner’s penis again, without the disappointment of a messy replica.

      The second time around we used duct tape. The seal was much better, which meant it did not leak at all. Despite this we still had some issues with creating the mould. My partner found it very difficult to sustain his erection whilst his penis was in the moulding liquid, so the mould was slightly smaller than his actual penis size. The instructions say that it is okay if the penis is touching the side of the plastic container, my partner’s penis did slightly. This was an issue when it was time to remove his penis as the mould. The side of the mould where his penis touched was much thinner, and extra care was needed in order to make sure the mould was still intact.

      My partner decides to keep his pubic hair, and despite taking the advice of the instructions by using Vaseline we still found that the moulding substance stuck to his pubic hair. We had to cut his pubes in order to remove the mould which was quite funny, as well as being very tedious. I would definitely recommend shaving before making the mould to prevent this.

      Pouring the silicone into the mould, and inserting the vibrator is very easy and straightforward. The silicone takes 24 hours to set. Being a very impatient person, this felt such a long time. When the silicone had set, we removed the dildo. We found that the part of the penis that was touching the sides was a little misshaped, despite the instructions stating that it was fine. The side of the dildo that touched the tube looked a bit of a mess, although was still useable.

      The colour of the silicone is not very natural colour, we both think that it is more of a pink colour rather than being skin toned.

      The vibrator for the penis didn’t feel very powerful. This was quite disappointing as I enjoy powerful vibrations more, however would be perfect for people who prefer less intense vibrations.

      The dildo turned out looking a little like my partner’s penis, but was a little messy. Next time I know not to let it touch the sides. Despite this it was very fun to make.

    2. Overall Rating
      7 out of 10 stars
      Fun to make.
      Instructions where not well thought out.
      Bottom line
      Good idea, but needs a little tweaking.
    3. 5 people found this review helpful. Was this review helpful to you? Yes